Classic D line WER 03 rgb
Classic, pure
Classic, pure
Classic, pure
Classic, pure


Classic, pure

The panorama channel - a breathtaking effect: The water flows over, continues right into the horizon and creates an impressive atmosphere. Elegant, calm, genuine - just like the classic infinity pools. Instead of stairs we have smart walk-in steps with natural stone and a stainless steel handrail. All stainless steel components have a rectangular and simple shape - optimally mirroring the new design.

D-Line Classic is a one-piece swimming pool made of Epoxy Acrylate using sandwich construction with wall insulation 20 mm and floor insulation 30 mm. Safety edge system on the long sides and safety ledge as well as the integrated steel frame are standard equipment.


Recommended Accessories:

Equipment package
1 (2) skimmer with water level controller (8 cm), overflow d 50, 2 (4) inlet jets, 1 1/2“, stainless steel with polished faceplate, 1 low level wall suction fitting, 1 bottom outlet sump with cover, 1 underwater light, LED warm white 50 W, incl. installation recess, with transformer 100 VA and plastic connection box, stainless steel polished face-plates
Coping Stones granite, grey
60 x 60 x 6.3 cm, with overhanging nose mottled surface, cut out for the fiberglass skimmer lid
2 grabrails made of square tubings, polished, 80 cm high, incl. fixing devices and bezels, 3-step ladder with fixing material for placing natural coping stones on site
3 basalt stones for step treads
black with fixing material
Stainless steel handrail, polished, 1 m long
made of square tube, polished, with 2 mounting flanges and wall anchors
Stainless steel handrail, polished, 2 m long
made of square tube, polished, with 2 mounting flanges and wall anchors
Twinjet 800 B counter current unit
double jet system with air regulator, pump 2.2 kW-400 V, nozzles with 2“ connection can be installed in the backfilling concrete, piping to be done at the site
Healthstream massage system 4-22 control
4 Superjet massage jets, pump 2,2 kW, 1 air control and PN-switch, white or polished

Underground roller shutter cover

Roller shutter shaft Integra 2-13
for an extra high water level, extends the pool by 48 cm, with hinged seat bench and 2 inlet nozzles
Electrical roll-up fixture
24 V DC, with stainless steel shaft and integrated motor, key switch, switch box and transformer
Roller shutter cover
6 cm breadth, cover in polycarbonate solar, PVC solar version or PVC white version
Roller shutter niche
The roller shutter is installed behind the pool wall and below the coping stones. It extends the pool by 25 cm and protrudes 50 cm into the pool. For inspection purposes the screen can be totally removed. Incl. 2 inlet nozzles.

Find a RivieraPool partner in your area and seek advice. Get in direct contact with our competent consultants. Experience a RivieraPool in your area by arranging a test swim.